Andesen TECCO Wire Mesh is manufactured using high-tensile steel wire with diameters ranging from 2mm to 4mm and a minimum tensile strength of 1770N/mm². Our TECCO slope stabilization system is specifically designed to stabilize steep and unconsolidated rock slopes.
TECCO mesh's high tensile strength steel wire, knotted ends, and specific specifications contribute to its ability to provide robust protection. The mesh's strength and structural integrity make the slope stabilisation mesh suitable for applications where strong support and containment are required, such as rockfall protection on slopes, tunnels, or other critical infrastructure.
High Tensile Strength Steel Wire: TECCO mesh is manufactured using high tensile strength steel wire, typically with diameters of 3.0mm, 4.0mm, or 2.0mm. The steel wire used in TECCO mesh has a minimum tensile strength of 1,770N/mm². This high tensile strength enables the mesh to withstand substantial forces and provide reliable support.
Knotted Ends: TECCO slope stabilization system is designed with knotted ends, ensuring a secure connection between individual wires. The knotted ends typically have a minimum of 1.5 laps, enhancing the mesh's structural integrity and resistance to deformation.
Tecco Mesh | ||||||
Wire Diameter mm | Hole Size mm | Weight Kg/ m² | Width M/Roll | Length M/Roll | Wire Strength | Breaking Load of Single Wire |
2 | 62x95 | 1.15 | 3.5 3.9 3.3 | 10 20 30 41 | 1770MPA | 12.5KN |
3 | 83x143 | 1.65 | ||||
4 | 83x138 | 3.30 | ||||
102 x 177 | 2.60 | |||||
Tecco mesh is used in a wide range of engineering and construction applications. It is commonly employed in slope stabilization, rockfall protection, tunnel reinforcement, soil retention, and other geotechnical and civil engineering projects. Tecco mesh is designed to withstand heavy loads, provide erosion control, and enhance safety in challenging terrain conditions.
Tecco wire mesh is made from high-tensile steel wires that offer exceptional strength and durability. The wires used in Tecco mesh are typically manufactured with a tensile strength ranging from 1770 N/mm² to 1960 N/mm², making it suitable for demanding applications.
Tecco wire mesh is relatively easy to install, which contributes to its efficiency in construction projects. It can be quickly anchored or attached to the desired structure using various methods, such as bolts, plates, or specialized connectors. The installation process is typically straightforward and requires minimal equipment or specialized training.
Andesen Tecco system is often used in conjunction with other geotechnical systems or structures. It can be combined with anchor systems, mesh facing, soil nails, or shotcrete to create comprehensive and integrated solutions for stabilization and reinforcement projects.
Andesen Tecco slope stabilization system is typically manufactured using steel wires that are galvanized or coated with corrosion-resistant materials. This enhances its resistance to rust and corrosion, ensuring long-term durability and performance, even in harsh environmental conditions.
